EB40 Batch Controller

Kasama sa mga karaniwang aplikasyon ang pagbobote o pag-iimpake, mga diluting concentrates, at pagdaragdag ng mga sangkap.

SKU EB406D0FM

₱23,200.00 - ₱36,400.00

₱23,200.00

₱23,200.00 - ₱36,400.00

₱23,200.00

Ang FLOMEC EB11 "EasyBatch" ay isang dual-stage na batch controller na idinisenyo upang lumikha ng mahusay at tumpak na karanasan sa pagbibigay.

Maaaring i-mount nang direkta sa isang FLOMEC® flow meter o malayuan at tugma sa maraming uri ng mga signal ng industriya, ang EB11 ay nagbibigay-daan sa user na kontrolin ang dami ng fluid na ibinibigay sa kanilang proseso, habang ang malaking 7-digit na display na may backlight ay nagbibigay-daan sa madaling pagbabasa ng status ng batch sa liwanag o madilim na mga kondisyon. Nakalagay sa isang IP66/67-NEMA4X-rated glass-reinforced nylon enclosure para sa mas mataas na impact at corrosion resistance, lalo na sa washdown environment.

Features

2 digital na NPN output na may kasalukuyang rating na hanggang 300 mA para sa direktang kontrol ng mga solenoid valve o para kumonekta sa mga relay para bigyang-daan ang kontrol ng malalaking valve at pump.
Madaling gamitin ang 2 button controller
Lumalaban sa panahon at matibay IP66/67 - NEMA4X enclosure
Madaling basahin ang backlit na 7-digit na display
Napanatili ang mga setting pagkatapos ng pagkawala ng kuryente

Specifications

Uri ng Instrumento: Batch Controller
Uri ng Pag-mount: Meter at Stem Mount, Wall, Pipe o Panel mount
Saklaw ng Operating Temperatura: -10°C - 60°C

Applications

Sauce Manufacturing: Ensure consistent flavor and texture in sauces, dressings, and condiments by accurately controlling the addition of liquids.
Microbreweries: Add exact strike water volumes every time for consistent
Wine and Spirits Production: Accurately measure and blend different liquids during the winemaking or distilling process.
Chemical Mixing: Accurately measure, blend and dilute chemicals for the production of cleaning agents, fertilizers, and other chemical products.
Cosmetic Production: Control the precise addition of liquids in the manufacturing of lotions, creams, and perfumes.
Water Treatment: Control the addition of chemicals for water purification and treatment processes.
Fuel Dispensing: Accurately measure and dispense fuels at fuel depots.
Agriculture: Control the dosage and application of liquid herbicides and pesticides in agricultural settings.
Aquaculture: Accurately dispense medications and nutrients in fish farms and aquaculture facilities.
Wastewater Treatment: Control the addition of chemicals in wastewater treatment processes including PAC dilution, reducing waste and increasing effectivity.
Building Industry: Dilution and addition of cement additives, and dedusting agents.

Dami

FREQUENTLY ASKED QUESTIONS

Do I need single or dual stage batch control?

The EB40 is suitable for single stage operation. For dual stage operation use the EB11 or F130. Single stage operation is suitable for line sizes up to 40 mm or for larger slower acting valves. Hydraulic shock or water hammer may cause flow meter damage if a larger valve closes too fast.

Do I need power for the batch controller?

10-30Vdc power will be required as the EB40 has either a solid state or mechanical relay to control a valve.

Can I use the EB40 Batch Controller with remote start/stop/reset buttons?

Yes, the EB40 Batch Controller has remote relays so that an operator can start and stop a batch and rest it if required. It also has an interlock that will prevent the EB40 from measuring until a vessel is in place when used with a proximity sensor.

How do I choose that right solenoid for my system?

The choice of solenoid depends on a variety of specifications. The voltage, the pipe size, the pressure in the line, the chemical compatibility, the close rate and whether the valve is normally open or normally closed. The power rating is important to determine whether a mechanical relay is required between the EB11 and the solenoid, the maximum rating for a solenoid that can be wired directly to the output of the EB11 is 7.2 watts at 24v DC. See our See our EB11 Design Guide for more information on solenoid selection.

Can I pause the batch?

The batch volume can be paused and restarted at any time with the touch of a button.

Can I set multiple batch totals?

The EB40 Batch Controller has a ten batch volume storage, that can be easily selected. The volumes can be programmed with the CDS software from any Windows computer.

Can I use the EB40 to start and stop a pump?

The EB40 Batch Controller can be used to turn on and off a pump using the mechanical relay installed inside. The more accepted and accurate method is to use an automatic valve to shut off flow. This method has a faster response and gives more repeatable batch volumes.

Can the EB40 be used in areas containing flammable liquids such as unleaded petrol or alcohol?

No. The EB40 Batch Controller can only be used in areas where there is no risk of igniting an explosive gas or dust atmosphere e.g. petrol, solvents, alcohols. Consider the F130 Intrinsically Safe Batch Controller for such applications.